Adler Flug

Always clean the surface before application to remove any loose particles or laitance.
Ensure that the surface is solid (hard and rigid) for the given application and free from voids, holes, and cracks.
Pre-wetting of blocks. (Not required for weber blokset plus).
Mix powder to water (as per mixing ratio) and blend to a smooth, workable stiff paste.
Always add the powder to water.
Allow the mix to stand for 2-3 min for the paste to mature.
Do not add water to the already mix slurry to extend the pot life.
Put well-mixed mortar on the block with the help of trowel spread mortar uniformly on the unit for the specified bed thickness.
Firmly place the block with slight shear to ensure proper transfer and bonding.
mortar to be applied on the block and column and beam for good bonding at the joints.

Weberwall Blokfix